Adibpur, F.
Influence of Type and Pressure of Synthesis Environment on ZrB2-ZrC Nano-Structured Powder Characteristics Synthesized by MASHS as a Heat Protective Shield in Aerospace Applications [Volume 2, Issue 4, 2013, Pages 53-59]
Ahmadi, A.
Study of Corrosion in archeological bronze pieces from Luristan province [Volume 2, Issue 3, 2020, Pages 37-41]
Alizadeh, Masoud
The influence of sol-gel processing method on physical properties and acellular in vitro reactivity of bioactive glasses based on CaO-SiO2-P2O5: acidic catalysed single step process versus acid- base two step quick-gelling method [Volume 2, Issue 3, 2020, Pages 31-36]
Alizadeh, Mehdi
Optimization of fluid flow pattern of molten steel in the steelmaking tundish for clean steel production and optimum intermix amount [Volume 2, Issue 3, 2020, Pages 11-23]
Anbia, M.
Synthesise of nanoporous materials of MCM-41 by the extracted silica from sedge [Volume 2, Issue 4, 2013, Pages 1-9]
Asadian, K.
The effect of TiC additive on microstructure and final properties of microwave and conventional sintered Al-SiC composite [Volume 2, Issue 3, 2020, Pages 42-49]
Asadian, K.
The effect of sintering temperature on microstructure and microwave dielectric properties of 0.88Ba([Zn0.6Co0.4]1/3,Nb2/3)O3–0.1Ba(Ga1/2Ta1/2)O3–0.02BaZrO3 ceramics [Volume 2, Issue 4, 2013, Pages 35-42]
B
Badiei, E.
Synthesis of ZnO nanoparticles using an ionic liquid and investigation of their antibacterial activity [Volume 2, Issue 4, 2013, Pages 19-25]
Bagheri, M.
Synthesis of ZnO nanoparticles using an ionic liquid and investigation of their antibacterial activity [Volume 2, Issue 4, 2013, Pages 19-25]
Bagheri, R.
Study on AA7010 aluminum alloy processed by mechanical alloying [Volume 2, Issue 3, 2020, Pages 1-10]
Bakhshi, S.R.
Study on AA7010 aluminum alloy processed by mechanical alloying [Volume 2, Issue 3, 2020, Pages 1-10]
Borhani, G.H.
Study on AA7010 aluminum alloy processed by mechanical alloying [Volume 2, Issue 3, 2020, Pages 1-10]
E
Ebadzadeh, T.
The effect of TiC additive on microstructure and final properties of microwave and conventional sintered Al-SiC composite [Volume 2, Issue 3, 2020, Pages 42-49]
Ebrahimi-kahrizsangi, R.
Evaluation of bioactivity poly-3-hydroxybutyrate coated Nano-Bioglass 45S5 composite scaffolds for bone tissue engineering [Volume 2, Issue 4, 2013, Pages 10-18]
Edris, Hossain
Optimization of fluid flow pattern of molten steel in the steelmaking tundish for clean steel production and optimum intermix amount [Volume 2, Issue 3, 2020, Pages 11-23]
G
Ghaderi, Mohammad
Effect of roughness of the substrate on High-temperature wear behavior of electroless nickel-phosphorus coatings [Volume 2, Issue 3, 2020, Pages 24-30]
Ghasali, S.E.
The effect of TiC additive on microstructure and final properties of microwave and conventional sintered Al-SiC composite [Volume 2, Issue 3, 2020, Pages 42-49]
Ghoreishy, A.A.
Synthesise of nanoporous materials of MCM-41 by the extracted silica from sedge [Volume 2, Issue 4, 2013, Pages 1-9]
Gjprbamo, F.
Synthesise of nanoporous materials of MCM-41 by the extracted silica from sedge [Volume 2, Issue 4, 2013, Pages 1-9]
H
Hesaraki, Saeed
The influence of sol-gel processing method on physical properties and acellular in vitro reactivity of bioactive glasses based on CaO-SiO2-P2O5: acidic catalysed single step process versus acid- base two step quick-gelling method [Volume 2, Issue 3, 2020, Pages 31-36]
K
Karamian, E.
Investigation of microstructure, mechanical and wear properties of nanocomposite Al-5%Cu/SiC produced by powder metallurgy method [Volume 2, Issue 4, 2013, Pages 27-34]
Karbasi, S.
Evaluation of bioactivity poly-3-hydroxybutyrate coated Nano-Bioglass 45S5 composite scaffolds for bone tissue engineering [Volume 2, Issue 4, 2013, Pages 10-18]
Kashani Bozorg, S. F.
Mechanical Assessment of AZ31/TiCnano-composite surface layer fabricated using friction stir processing [Volume 2, Issue 4, 2013, Pages 43-52]
Kazemzadeh, Ashgar
The influence of sol-gel processing method on physical properties and acellular in vitro reactivity of bioactive glasses based on CaO-SiO2-P2O5: acidic catalysed single step process versus acid- base two step quick-gelling method [Volume 2, Issue 3, 2020, Pages 31-36]
M
Mehraban, Z.
Synthesise of nanoporous materials of MCM-41 by the extracted silica from sedge [Volume 2, Issue 4, 2013, Pages 1-9]
Monshi, A.
Evaluation of bioactivity poly-3-hydroxybutyrate coated Nano-Bioglass 45S5 composite scaffolds for bone tissue engineering [Volume 2, Issue 4, 2013, Pages 10-18]
Monshi, A.
Investigation of microstructure, mechanical and wear properties of nanocomposite Al-5%Cu/SiC produced by powder metallurgy method [Volume 2, Issue 4, 2013, Pages 27-34]
Monshi, Ahmad
Synthesis and Investigation of Composite of Magnesium OxyChloride and Tri hydrate Magnesium Hydrogen Phosphate with Nano Silica [Volume 2, Issue 1, 2013, Pages 81-89]
Montazeri, M.
Evaluation of bioactivity poly-3-hydroxybutyrate coated Nano-Bioglass 45S5 composite scaffolds for bone tissue engineering [Volume 2, Issue 4, 2013, Pages 10-18]
N
Nezafati, N.
Synthesis and evaluation of triangular shaped silver nanoparticles on antibacterial properties of gram-positive and gram-negative bacterium [Volume 2, Issue 4, 2013, Pages 61-66]
P
Pazouki, M.
Synthesis of ZnO nanoparticles using an ionic liquid and investigation of their antibacterial activity [Volume 2, Issue 4, 2013, Pages 19-25]
Pouraghaei, S.
Synthesis and evaluation of triangular shaped silver nanoparticles on antibacterial properties of gram-positive and gram-negative bacterium [Volume 2, Issue 4, 2013, Pages 61-66]
S
Saatchi, A.
Investigation of Step Annealing Heat Treatment on the Pitting Corrosion Resistance of Super Duplex Stainless Steel Welded Pipes [Volume 2, Issue 4, 2013, Pages 67-75]
Saeedi, Ali
Effect of roughness of the substrate on High-temperature wear behavior of electroless nickel-phosphorus coatings [Volume 2, Issue 3, 2020, Pages 24-30]
Saffar Talouri, Ali
Synthesis and Investigation of Composite of Magnesium OxyChloride and Tri hydrate Magnesium Hydrogen Phosphate with Nano Silica [Volume 2, Issue 1, 2013, Pages 81-89]
Sangpour, P.
Synthesis of ZnO nanoparticles using an ionic liquid and investigation of their antibacterial activity [Volume 2, Issue 4, 2013, Pages 19-25]
Shadmehr, A.
Study of Corrosion in archeological bronze pieces from Luristan province [Volume 2, Issue 3, 2020, Pages 37-41]
Shafieirad, Asefeh
Synthesis and Investigation of Composite of Magnesium OxyChloride and Tri hydrate Magnesium Hydrogen Phosphate with Nano Silica [Volume 2, Issue 1, 2013, Pages 81-89]
Shamanian, M.
Investigation of Step Annealing Heat Treatment on the Pitting Corrosion Resistance of Super Duplex Stainless Steel Welded Pipes [Volume 2, Issue 4, 2013, Pages 67-75]
Sodagar, L.
Study of Corrosion in archeological bronze pieces from Luristan province [Volume 2, Issue 3, 2020, Pages 37-41]
Sohrabi, M.
The influence of sol-gel processing method on physical properties and acellular in vitro reactivity of bioactive glasses based on CaO-SiO2-P2O5: acidic catalysed single step process versus acid- base two step quick-gelling method [Volume 2, Issue 3, 2020, Pages 31-36]
Solbi, E.
Mechanical Assessment of AZ31/TiCnano-composite surface layer fabricated using friction stir processing [Volume 2, Issue 4, 2013, Pages 43-52]
T
Tamizifar, M.
Investigation of Step Annealing Heat Treatment on the Pitting Corrosion Resistance of Super Duplex Stainless Steel Welded Pipes [Volume 2, Issue 4, 2013, Pages 67-75]
Tayebifard, S.A.
Influence of Type and Pressure of Synthesis Environment on ZrB2-ZrC Nano-Structured Powder Characteristics Synthesized by MASHS as a Heat Protective Shield in Aerospace Applications [Volume 2, Issue 4, 2013, Pages 53-59]
V
Vafaie, L.
Investigation of microstructure, mechanical and wear properties of nanocomposite Al-5%Cu/SiC produced by powder metallurgy method [Volume 2, Issue 4, 2013, Pages 27-34]
Y
Yazdani-rad, R.
The effect of TiC additive on microstructure and final properties of microwave and conventional sintered Al-SiC composite [Volume 2, Issue 3, 2020, Pages 42-49]
Younesi, H.
Synthesise of nanoporous materials of MCM-41 by the extracted silica from sedge [Volume 2, Issue 4, 2013, Pages 1-9]
Yousefieh, M.
Investigation of Step Annealing Heat Treatment on the Pitting Corrosion Resistance of Super Duplex Stainless Steel Welded Pipes [Volume 2, Issue 4, 2013, Pages 67-75]
Yuzbashi, A.A.
Study of Corrosion in archeological bronze pieces from Luristan province [Volume 2, Issue 3, 2020, Pages 37-41]
Z
Zakeri, M.
Influence of Type and Pressure of Synthesis Environment on ZrB2-ZrC Nano-Structured Powder Characteristics Synthesized by MASHS as a Heat Protective Shield in Aerospace Applications [Volume 2, Issue 4, 2013, Pages 53-59]